Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Networking Products

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-25-2017, 08:44 AM
cook166 cook166 is offline
Aspiring Member
 
Join Date: May 2017
Posts: 1
cook166 has 10 reputation points
Default Upgrade WAP9132

Avaya WAP9132 WiFi AP
SCD Firmware: 5.00
Bootloader: 7.1.0
Radio Driver: 3.1.0
Software Version: 7.6.1

I'm trying to upgrade the software from 7.6.1 to 8.3.1. This AP is being managed by WOS. I have successfully upgraded dozens of other AP's in my environment with the exact same specs using the same file. I've tried upgrading via the WOS, CLI, and also logging into the Web utility of the AP directly. I have 3 AP's that will not update to this or any other version of software.

When I try to upgrade from the web interface of the AP directly:

When I set the active image to the new version it says the system software image failed integrity test and removing invalid system software image. When I try to upload the new software it says processing and validating system software upload.... then says an error occurred uploading the requested software image.


When I use WOS to push out the upgrade:

Begins the upgrade process - connecting to Access Point, shows 0% completed,
then says sleeping for 5 seconds before retrying transfer.
Then it tries the entire process again 5 times with the same results etc...
Eventually it says Failed Upgrading Access Point OS: timed out 5 times while attempting to transfer files.

I've reboot the AP's, power cycled them, restored factory defaults etc... Anyone have any ideas why I can't upgrade the software?

Last edited by cook166; 06-13-2017 at 09:47 AM.
Reply With Quote
  #2  
Old 08-25-2017, 07:40 AM
mccor11 mccor11 is offline
Aspiring Member
 
Join Date: Aug 2017
Posts: 2
mccor11 has 10 reputation points
Default

I'm having this exact same problem with a few 9132 access points. Still haven't found a solution.
Reply With Quote
  #3  
Old 08-28-2017, 09:03 AM
mccor11 mccor11 is offline
Aspiring Member
 
Join Date: Aug 2017
Posts: 2
mccor11 has 10 reputation points
Default

OK, I found a solution. You have to use the Avaya Virtual Console.

Open avaya console.
Select the AP that is having problems with the firmware update.
Reboot the AP
Press spacebar to stop the boot process
Type in username and password
Type DHCP to get an IP address.
Type dir to see what is stored on the flash.
Set up your TFTP server
type "update server <tftp server IP> XS-8.3.1-7069.bin" without the quotes.
Wait for the file to transfer
type dir to make sure the file is there.
type update to reboot the AP
go to the web interface, go to system tools and select the new bin file.
Click Save and Reboot.
Reply With Quote
Reply

Tags
wap9132, wifi, wlan9100, wos

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 08:32 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.