Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-07-2011, 07:32 AM
bseno bseno is offline
Whiz
 
Join Date: Jun 2011
Posts: 41
bseno has 10 reputation points
Default IP Phone TN configuration

Dear All,

For an CS 1000 11xx series IP Phones and all others series,is it possible to have a password on the phoneset when putting or changing the TN and the Node I.D?

This is for the security so that nobody can play around on the Phone to change the TN or Node I.D .

Thank you.


Regards,

Benny
Reply With Quote
  #2  
Old 09-07-2011, 05:21 PM
gwebster gwebster is offline
Guru
.
 
Join Date: Mar 2010
Location: Ottawa
Posts: 143
gwebster has 25 to 49 reputation pointsgwebster has 25 to 49 reputation points
Default

Look in the IP Line NTP for "IP Phone Installer Password".
Reply With Quote
  #3  
Old 09-07-2011, 11:02 PM
bseno bseno is offline
Whiz
 
Join Date: Jun 2011
Posts: 41
bseno has 10 reputation points
Default

The password 26567*738 is for IP Address configuration etc.What I want to know if there's such a password that we can provide before we define the TN and Node I.D on the the IP Phones.

Thanks.

Benny
Reply With Quote
  #4  
Old 11-30-2011, 06:32 AM
clanda clanda is offline
Hot Shot
 
Join Date: Nov 2011
Posts: 10
clanda has 10 reputation points
Default

Yes, there is an option for node password, we have few customers with this. I guess you can find the information in Signaling server fundamentals NTP

With this password running, after rebooting and changing node id, the user will be required to put it before the TN
Reply With Quote
  #5  
Old 12-02-2011, 02:15 AM
clanda clanda is offline
Hot Shot
 
Join Date: Nov 2011
Posts: 10
clanda has 10 reputation points
Default

nodePwdSet - Sets the node password. If a non-zero length password
is configured, all IP Phones that attempt to register after
this command is entered display a prompt for node
password before the TN can be modified.

nodePwdShow - Shows the node password settings.

nodePwdEnable - Enables node password checking.
nodePwdDisable - Disables node password checking.
nodeTempPwdClear - Deletes the temporary password and resets its uses and
time to zero.
nodeTempPwdSet - Sets the node-level TN entry temporary password.
Reply With Quote
  #6  
Old 12-29-2011, 02:52 PM
bergsj bergsj is offline
Member
 
Join Date: Dec 2011
Posts: 4
bergsj has 10 reputation points
Default

That helps with my issue too. Thanks!

Jeff
Fargo 45000
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:50 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.