Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-16-2012, 10:07 AM
davis124 davis124 is offline
Brainiac
 
Join Date: Oct 2011
Location: Omaha, NE
Posts: 50
davis124 has 12 reputation points
Default One-X Communicator R6.1 Call Session Error

Hello All -

Running into a wierd issue with the latest One-X Communicator R6.1, we are installing this as a test and it has been working great until we turned on Media Encryption on the IP-Codec set used for One-X Communicator.

As soon as we turn Media Encryption on (It doesn't matter if it's AES, AEA, or the SRTP types) One-X Communicator will then fail on making outbound calls with a Call Session Error. I know One-X Communicator is suppose to support SRTP but for some reason it's not working correctly or I am missing something.

Has anyone else had this type of problem?

Thanks,

James
Reply With Quote
  #2  
Old 04-17-2012, 07:56 AM
rajanba rajanba is offline
Aspiring Member
.
 
Join Date: Apr 2012
Posts: 1
rajanba has 10 reputation points
Default

Below are the steps required to get SRTP working on 1XC 6.1 :

Make changes on CM for SRTP (server side changes)

1) Ensure Media Encryption Over IP as Y on page 4 , using command change system-parameters customer-options
2) SDP Capability Negotiation for SRTP as y on page 19 , using command change system-parameters features
3) On CM , Media Encryption set as
1: 1-srtp-aescm128-hmac80
2: 2-srtp-aescm128-hmac32 using change ip-codec-set 1 command , refer attachments

1XC Clients side changes

-Hard phone 46xx settings file as well as clients config file should also updated /modified for SRTP


Useful for 1XC :

<parameter>
<name>MediaEncryptionParameters</name>
<value>1,2</value>
</parameter>


46xx settings file-(For desk phone mode)

##
## Media Encryption Support
## Specifies media encryption (SRTP) options supported by
## phone. Up to 2 options may be selected. Values are in
## comma-separated list. Options should match those
## specified in CM IP-codec-set form.
## 1 = aescm128-hmac80
## 2 = aescm128-hmac32
## 3 = aescm128-hmac80-unauth
## 4 = aescm128-hmac32-unauth
## 5 = aescm128-hmac80-unenc
## 6 = aescm128-hmac32-unenc
## 7 = aescm128-hmac80-unenc-unauth
## 8 = aescm128-hmac32-unenc-unauth
## 9 = none (default)
SET MEDIAENCRYPTION "1,2"
##

Please note that if SRTP is enabled , other non SRTP endpoint calls will be failed.

Rajan
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 02:48 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.