Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Networking Products

Thread Tools Search this Thread Display Modes
Old 09-09-2011, 01:33 PM
mayler mayler is offline
Hot Shot
Join Date: Jul 2011
Posts: 23
mayler has 10 reputation points
Default Static NAT on Secure Router - Help

Have an interesting requirement.... I need to NAT a public address to a private address on a Secure Router 1002.

This is preventing me from reading about SPB!

I've read: http://support.avaya.com/css/P8/documents/100121840 (config guide for SR1002) but none of those configurations seem to work for me. Maybe I'm not doing it right?

I'm trying to nat to on a SR1002 which has two interfaces, a ppp bundle and an ethernet interface.

bundle is 'wan1'
ethernet 0

Traffic Destined to will hit, at which time I want it to NAT the destination to Source should remain the same.

I've tried:

config ip nat
enable static
interface wan1

I can ping now, but if I try pinging or I don't get a response.
Anyone doing anything like this? I figured it would be super easy...

Last edited by mayler; 09-09-2011 at 03:32 PM.
Reply With Quote
Old 09-09-2011, 04:00 PM
mayler mayler is offline
Hot Shot
Join Date: Jul 2011
Posts: 23
mayler has 10 reputation points

I'm retarded.

SR> configure terminal
SR/configure> interface bundle Trenton
SR/configure/interface/bundle Trenton> nat
SR/configure/interface/bundle Trenton/nat> enable dynamic
SR/configure/interface/bundle Trenton/nat> enable static
SR/configure/interface/bundle Trenton/nat> address

My test environment is using two ethernet interfaces to test this...and I tried configuring this on the wrong interface.

Maybe this post will help someone down the road.
Reply With Quote
Old 02-03-2014, 03:06 PM
krautd krautd is offline
Join Date: Jan 2014
Posts: 3
krautd has 10 reputation points

I'm trying to accomplish something similar but not having any luck. I want to static NAT a small range of IP addresses - one to one. For example, I want to static NAT on E0 to on E1, to and so on. I can get this working with a single NAT using the interface address, but I have not had any luck getting a range to work? From what I've read, it appears the WAN interface is limited to T1, which we do not have so I've been trying to accomplish this using only the LAN ports. Can this even be done on the SR1002?

Reply With Quote

nat secure router static

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 04:11 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.