Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Networking Products

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-14-2012, 09:02 AM
moraie moraie is offline
Aspiring Member
 
Join Date: Jun 2012
Posts: 1
moraie has 10 reputation points
Default ERS 4524GT and Polycom phones

Hi,

I am trying to configure Polycom phones on a ERS 4524gt-pwr switch.
I'm using the http://downloads.avaya.com/css/P8/documents/100123695 to guide me through that but it doen't work. The phone is booting up but gets an IP address from the data vlan.
I want to use LLDP detection.

Here are outputs of validations commands found in the document:

4524GT-PWR#show lldp med-network-policies port 1
-------------------------------------------------------------------------------
LLDP-MED network-policies
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Unit/ Application Type VlanID Tagging DSCP Priority
Port
-------------------------------------------------------------------------------
1 Voice 200 tagged 46 6
-------------------------------------------------------------------------------

4524GT-PWR#show lldp port 1 local-sys-data med
-------------------------------------------------------------------------------
LLDP local-sys-data chassis
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
ChassisId: MAC address 3c:b1:5b:8e:fc:00
SysName:
SysCap: rB / B (Supported/Enabled)
SysDescr:
Ethernet Routing Switch 4524GT-PWR HW:05 FW:5.3.0.3 SW:v5.6.1.052

MED-Device class: Network Connectivity Device
MED-POE Device Type: PSE Device
HWRev: 05 SerialNumber: LBNNTMMD5108NP
FWRev: 5.3.0.3 SWRev: v5.6.1.052
ManufName: Avaya ModelName: 4524GT-PWR
-------------------------------------------------------------------------------
LLDP local-sys-data port
-------------------------------------------------------------------------------
Port: 1

MED-Capabilities: CNLSI
MED-PSE PDPort Priority: Low Power Value: 16.0 Watt
MED-Application Type: Voice VLAN ID: 200
L2 Priority: 6 DSCP Value: 46 Tagged Vlan, Policy defined

-------------------------------------------------------------------------------
Sys capability: O-Other; R-Repeater; B-Bridge; W-WLAN accesspoint; r-Router;
T-Telephone; D-DOCSIS cable device; S-Station only.
Med Capabilities-C: N-Network Policy; L-Location Identification; I-Inventory;
S-Extended Power via MDI - PSE; D-Extended Power via MDI - PD.


4524GT-PWR#show lldp port 1 neighbor detail
-------------------------------------------------------------------------------
LLDP neighbor
-------------------------------------------------------------------------------
Port: 1 Index: 5 Time: 0 days, 00:21:55
ChassisId: Network address IPv4 0.0.0.0
PortId: MAC address 00:04:f2:23:64:05
SysName: Polycom SoundPoint IP 331
SysCap: TB / T (Supported/Enabled)
PortDesc: 1
SysDescr:
Polycom;SoundPointIP-SPIP_331;2345-12365-001,1;BR/4.2.2.0710/24-Feb-10 16:38;

PVID: PPVID Supported: none
VLAN Name List: none PPVID Enabled: none

Dot3-MAC/PHY Auto-neg: supported/enabled OperMAUtype: 100BaseTXFD
PMD auto-neg: 10Base(T, TFD), 100Base(TX, TXFD)

MED-Capabilities: CNDI / CNDI (Supported/Current)
MED-Device type: Endpoint Class 3
MED-Application Type: Voice VLAN ID: 0 (Priority Tagged)
L2 Priority: 0 DSCP Value: 0 Untagged Vlan, Policy unknown
Med-Power Type: PD Device Power Source: PSE and Local
Power Priority: Unknown Power Value: 4.5 Watt
HWRev: 2345-12365-001,1 FWRev: BR/4.2.2.0710/24-Feb-10 16:38
SWRev: SerialNumber: 0004f2236405
ManufName: Polycom ModelName: SoundPointIP-SPIP_331
AssetID:
-------------------------------------------------------------------------------
Sys capability: O-Other; R-Repeater; B-Bridge; W-WLAN accesspoint; r-Router;
T-Telephone; D-DOCSIS cable device; S-Station only.
Total neighbors: 1
Med Capabilities-C: N-Network Policy; L-Location Identification; I-Inventory;
S-Extended Power via MDI - PSE; D-Extended Power via MDI - PD.


I am missing something for sure but I can't find what.

Thanks.
Reply With Quote
  #2  
Old 07-23-2012, 08:45 AM
jfafinski jfafinski is offline
Aspiring Member
 
Join Date: Jul 2012
Posts: 2
jfafinski has 10 reputation points
Default

Hi,
If it can help you, this is Working with Aastra ip phones:



interface FastEthernet ALL
lldp tx-tlv port 3-11 dot3 mac-phy-config-status
exit
!
! *** 802.1ab vendor-specific Avaya TLVs config ***
!
!
! *** 802.1AB MED Voice Network Policies ***
!
interface FastEthernet ALL
lldp med-network-policies port 3-11 voice dscp 46 priority 6 tagging tagged vlan-id 805
exit


in this example vlan 805 Voice and vlan 1002 Data
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:01 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.