Avaya Support Forums  

Go Back   Avaya Support Forums > Small and Medium Business Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-05-2015, 06:15 PM
rodri399 rodri399 is offline
Aspiring Member
 
Join Date: Dec 2014
Location: Brazil
Posts: 2
rodri399 has 10 reputation points
Default Analog extn with digital trunk E1

Hi Guys,

I´m installing an IPO SE with a digital trunk R2 Digital and analog extensions.
When I use an analog extn, all external calls are dropped after the 4º digit.
After I configured the short code with a ; , I need to press # to complete the call.
Is there something to do to put these character in the short code ? Or is there other solution ?

Regards
Reply With Quote
  #2  
Old 02-06-2015, 09:43 AM
zakabog zakabog is offline
Genius
 
Join Date: Aug 2014
Posts: 300
zakabog has 25 to 49 reputation pointszakabog has 25 to 49 reputation pointszakabog has 25 to 49 reputation points
Default

Are you dialing with a 9 first, if so then check the short codes for that user and see that nothing overrides that, also check if there is a system wide XXXX short code.
Reply With Quote
  #3  
Old 02-16-2015, 09:34 AM
kirchenlo kirchenlo is offline
Guru
 
Join Date: Nov 2010
Posts: 195
kirchenlo has 15 reputation pointskirchenlo has 15 reputation points
Default

Extract out of the IPO Knowledgebase

; - Receive Sending Complete

When used this must be the last character in the short code string. If the Dial Delay Count is 0, a ; instructs the system to wait for the number to be fully dialed, using the Dial Delay Time or the user dialing #, to indicate completion and then acting on the short code. If the Dial Delay Count is not zero, the dialing is only evaluated when # is pressed.

The majority of North-American telephony services use en-bloc dialing. Therefore the use of a ; is recommended at the end of all dialing short codes that use an N before routing those calls to a trunk or ARS. This is also recommended for all dialing where secondary dial tone short codes are being used.

Maybe this helps?
Reply With Quote
Reply

Tags
e1; brazil; analog extn

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 03:18 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.