Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-02-2013, 02:24 AM
iabdulaal iabdulaal is offline
Aspiring Member
 
Join Date: Nov 2012
Posts: 1
iabdulaal has 10 reputation points
Exclamation G450 Power consumption

I have to calculate the power consumption of G450
Reply With Quote
  #2  
Old 03-04-2013, 06:46 AM
mskinner mskinner is offline
Genius
.
 
Join Date: May 2010
Posts: 209
mskinner has 11 reputation points
Default

A G450 gateway will draw a maximum of 133W fully loaded.
Reply With Quote
  #3  
Old 12-31-2013, 07:24 AM
thoma200 thoma200 is offline
Aspiring Member
 
Join Date: Dec 2013
Posts: 1
thoma200 has 10 reputation points
Default G450 Power Specifications

I need to get data on the following for the G450 with Dual Redundant Power Supplies (400W each):

1. Max Input VA (or Watts & Power Factor)
2. Max Output VA (or Watts & Power Factor)
3. Max BTU's Dissipated
4. The application will be 208 VAC (Nominal)

The power supplies are rated for 400 Watts, but this is typically what the output of the power supply is. I need to know the maximum input power that will be required for the power supplies in the configuration identified above. Additionally, it would be very helpful to get a reference for an Avaya document that contains this information so it can be included in our files.

We have purchased around $1MM dollars worth of equipment for our site wide phone switch upgrade (from Nortel SL-100), but the IT folks don't have the technical information for the electrical installation. The information you supply will help to provide this.

I can be called at 361-972-8639 if necessary. Thanks in advance for your assistance in this matter.
Reply With Quote
  #4  
Old 01-07-2014, 06:54 AM
aa1 aa1 is offline
Guru
.
 
Join Date: Feb 2010
Location: Budapest - Hungary
Posts: 185
aa1 has 24 reputation pointsaa1 has 24 reputation points
Solution Delivered Does this info help?

Overview for the Avaya G450 Branch Gateway
************************************************** ***
https://downloads.avaya.com/css/P8/documents/100171681

Voltage: 90-264 VAC, 47-63 Hz
Power rating: 1780 BTU/h (522 W)
Max current: 7 A

Power cord specifications
*******************************
For North America

The cord set must be UL Listed/CSA Certified, 16 AWG, 3-conductor (3rd wire ground), type SJT. One end is to be terminated to an IEC 60320, sheet C13 type connector rated 10A, 250V. The other end is to be terminated to either a NEMA 5-15P attachment plug for nominal 125V applications or a NEMA 6-15P attachment plug for nominal 250V applications.

For outside North America

The cord must be VDE Certified or Harmonized (HAR), rated 250V, 3-conductor (3rd wire ground), 1.0 mm2 minimum conductor size. The cord is to be terminated at one end to a VDE Certified/CE Marked IEC 60320, sheet C13 type connector rated 10A, 250V and the other end to a 3-conductor grounding type attachment plug rated at a minimum of 10A, 250V and a configuration specific for the region/country in which it will be used. The attachment plug must bear the safety agency certifications mark(s) for the region/country of installation.

Arbi

Last edited by rbrookes; 01-08-2014 at 01:31 PM.
Reply With Quote
  #5  
Old 04-22-2020, 11:00 PM
pushio pushio is offline
Aspiring Member
 
Join Date: Apr 2020
Posts: 1
pushio has 10 reputation points
Default

Hello. Found this old topic. I have the same task. There will be four G450 fully equiped with MM716 modules. I also saw in documentation for G450 Power rating - 522 W Max Current - 7A. I need to calculate the amount and characteristics of batteries. They must supply one hour working for these gateways. As far as I understood, power rating of 522 W is the power that can be delivered by the source to it`s output (to gateway modules). How to calculate the maximum power that PSU can consume from AC or from batteries.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 01:10 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.