Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old Today, 08:36 AM
navar126 navar126 is offline
Aspiring Member
 
Join Date: Sep 2019
Posts: 2
navar126 has 10 reputation points
Exclamation Swap/Move Extensions

Hi,

I am new in this forum and in the Avaya world. We just upgraded our phone system from Cisco to Avaya, having on premise IP Office Manager 11.x.x, with J139, B179, and J179 phones.

So in our environment I have to change extensions multiple times because of our staff coming and going all the time. I just learned that the phone has an extension (base extension) and the user has an extension as well. Our installer informed me that one way to swap extensions from one phone to another is to:
  1. Change the extension numbers in the Extensions Tab making sure they correspond to their Extension ID .
  2. Then Save the configuration and Merge.

However, when I do that, while the phones now will depict the correct extensions physically, under System Monitor the base extension and the user extension will still show a mismatch, which means that when the system reboots again the extensions will be back to where they belong, which will be back to step 1.

Can somebody please educate me in this matter? I just want to make sure there is a way to make this change remotely, WITHOUT rebooting the system (on the fly kinda way)

Thank you and will see if this community is active!! :P
Reply With Quote
  #2  
Old Today, 08:54 AM
thiel2 thiel2 is offline
Genius
 
Join Date: Apr 2013
Posts: 336
thiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation points
Default

You have a bit of a conundrum because the phones are IP phones. IP phones retain the extension number that they are registered to the system with. This is why you can unplug an IP phone, move it to a different location, and it will still be the same extension number.

Digital phones take on the extension number associated with the physical station port that they are connected to, so if you move a phone, you either move the jumper from the jack to the correct station port, or you do the renumber that you've outlined, AND either reboot the system or go to each phone involved in the swap and dial *36 to log out the current user and return to the base user.

I would suggest that you use Hot Desking for your users that come and go. They sit down at an extension and dial a code to log in with their extension number, and dial another code to log out when they are done.

So that the phones can be usable when no one is logged in, create a set of users and extension numbers for when no one is hot desked in, perhaps restrict them to internal and emergency calling only, only put a single call appearance and a Login button to remind the user to login when they sit down. If your regular users have extension numbers in the 100's, make a bunch of extensions and users in the 200's and register the phones to those numbers for when no one is hot desked in.
Reply With Quote
  #3  
Old Today, 09:07 AM
navar126 navar126 is offline
Aspiring Member
 
Join Date: Sep 2019
Posts: 2
navar126 has 10 reputation points
Default

@thiel2: Thank you for your reply.

In a school district environment I cannot disallow the staff to not call outside or ask them to log in and our repetitively over the course of the day.

Keeping in mind the steps I am following, that is changing the extension numbers making sure they match their Extension ID, is there a way that after making a change, I can possibly send a remote command to log out the phone instead of going physically to the location and dial *36? Maybe either through SysMon or System Status?

Thank you in advance!
Reply With Quote
  #4  
Old Today, 10:32 AM
thiel2 thiel2 is offline
Genius
 
Join Date: Apr 2013
Posts: 336
thiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation points
Default

So during the course of the day, you are changing the base extension to match the user extension as the users move around the campus and use different phones?

Or are you trying to line up your base and user extensions, and nothing will change until you get a new person with a new extension number take over an old telephone?

Go to a phone where the base and user extensions do not match, go into the Admin menu of the phone, and select Logout. This is different from *36, it removes the base extension from the telephone set, and puts you at the login prompt as if this is the first time the phone was ever plugged in. Now you can input the extension number and login code. HOWEVER, you can't have another telephone somewhere already logged in with that base extension number. So if Base 101 has User 102, and Base 102 has User 101, you need to do a Logout on BOTH phones, then log them back in. Once the Base and User extensions match, they will always stay on those numbers.
Reply With Quote
Reply

Tags
extension, extensions, ipo, move, swap

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:00 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.