Avaya Support Forums  

Go Back   Avaya Support Forums > Avaya Aura & Unified Communications

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-12-2014, 02:04 PM
hbersani hbersani is offline
Aspiring Member
 
Join Date: Apr 2011
Posts: 2
hbersani has 10 reputation points
Default Has anyone gotten System Manager Inventory Discovery to work?

We are running System Manager 6.3.10 and are trying to configure discovery of our existing inventory. The documentation is almost non-existant and we don't seem to be able to get this to work. It used to work great when it was in the Network Management Product but since it got merged into System Manager, we haven't been able to get it to work.

We are trying to get this to work so we can then use the software deployment component which is the replacement for SUM (Software update manager).

If you have it working and wouldn't mind discussing your experiences, I would be very interested in speaking with you.

Hal Bersani
John Hancock
[REMOVE]hbersani@jhancock.com
Reply With Quote
  #2  
Old 01-02-2015, 03:58 PM
rossmitch rossmitch is offline
Hot Shot
 
Join Date: Apr 2010
Posts: 15
rossmitch has 10 reputation points
Default

Im sure I had it working previously, but will be setting it up again in the next two weeks to use the update manager if you need to have a chat about it
Reply With Quote
  #3  
Old 01-06-2015, 09:25 AM
disaiam disaiam is offline
Member
.
 
Join Date: Apr 2014
Posts: 7
disaiam has 12 reputation points
Default System Manager Inventory and Discovery

A service ticket was open with Avaya to troubleshoot this issue with John Hancock.

SNMP v1 discovery of CM and Gateways works correctly. A bug was found when using SNMPv3. The bug is being resolved in System Manager 6.3.12 (GA Feb 9, 2015) and will allow support of SNMPv3 for discovery . As a side note, the privacy types AES192 and AES 256 are not supported for discovery, when using SNMPv3. At a later date, when an update is made to the SMGR SNMP4J sub-component, the SNMPv3 privacy types of AES192 and AES256 will be supported.

Also note that the System Manager Admin Guide posted on the Avaya Support portal has the following documented:

Chapter 15- Managing Inventory (to setup discovery)
Chapter 25 – Software Management (to perform updates and upgrades once the discovery is collected and an inventory is established)

Last edited by disaiam; 01-06-2015 at 09:36 AM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 03:43 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.