Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-17-2010, 06:40 AM
philipmyers philipmyers is offline
Aspiring Member
 
Join Date: Mar 2010
Posts: 2
philipmyers has 10 reputation points
Default S8300 Console Access from Services Port

We are trying to get access to the Redhat Linux Console in Single user mode on the S8300. Our instructions say to do the following:

1. User serial cable/DB9 (aka null modem, or cross-connect C5 cable) connect from a laptop PC to the Avaya Services Port.

2. Configure serial port for 9600 bits per second, 8 data bits, no parity, 1 stop bit, hardware flow control, vt100 emulation, and telnet terminal id vt100.

3. If the configuration in step 2 doesn't work, user F1 to enter BIOS configuration on the server and set console redirect to 9600 baud.

We are unable to access the console mode, we would like to boot up on Redhat Linux Rescue DVD and use the DD command to backup the Hard Drive, so while installing
Patches, we can restore in case of problems.
Reply With Quote
  #2  
Old 03-19-2010, 02:06 AM
aviswanathan's Avatar
aviswanathan aviswanathan is offline
Hot Shot
.
 
Join Date: Feb 2010
Location: Pune
Posts: 19
aviswanathan has 11 reputation points
Default

Put a Avaya CM installation CD and reboot S8300. After server is rebooted it access services port using ethernet cable from your laptop. You see three option which is normally seen on installations and the third option is to enter rescue shell
Reply With Quote
  #3  
Old 03-26-2010, 11:47 AM
philipmyers philipmyers is offline
Aspiring Member
 
Join Date: Mar 2010
Posts: 2
philipmyers has 10 reputation points
Default

This is procedure we ended up using:

Backup/Restore Procedure for Telephony Test Lab S8300 Systems


1. Boot into Rescue Mode
1. Connect a RJ45 crossover cable from the S8300’s SERVICE LAN port to LAN port on the PC.
2. Configure the PC for IP Address of 192.11.13.5/31.
3. Connect the USB drive with the Linux Partitions to the S8300 via USB cable.
4. Insert the Communication Manager 4.0.2 disk into the S8300’s external DVD-Rom Drive and request the Telephony Admin’s to boot the System.
5. Telnet from the PC to 192.11.13.6.
6. When presented with the Installation Menu on S8300, select “Linux Rescue”.
7. mkdir /usb
8. mount /dev/sdb4 /usb

2. Backup S8300 System:
1. dd if=/dev/sda of=/usb/dlis5.mmdd bs=4096

3. Restore S8300 System:
1. dd if=/usb/dlis5.mmdd of=/dev/sda bs=4096
Reply With Quote
Reply

Tags
access, console, s8300

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:13 AM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.