outside calls

[szleg4]

Hi,
My Customer has no licence for EAS.
He has a coverage answer-group with 4 stations answering a DID number.
One of these station needs to be now forwarded to an outside number as he works from home now.
We have setup a send-call with coverage remote to do that.
Unfortunately, the calls are not forwarded to the outside number.
Thanks for your help
Kind regards

[mlombardi1]

Make sure his station is assigned to a class-of-service (COS) with "Restrict Call Fwd-Off Net" disabled. If it already is, try configuring the unconditional forwarding on page 3 of his station form.

[richa164]

depends on how you are trying to achieve this are you saying you want calls to hit the C/A group and then at one station ring off net , as with this set up you wont get that.


If you are saying something different have you got trunk to trunk transfer enabled

[szleg4]

Originally Posted by mlombardi1

Make sure his station is assigned to a class-of-service (COS) with "Restrict Call Fwd-Off Net" disabled. If it already is, try configuring the unconditional forwarding on page 3 of his station form.

Thanks for your help mlombardi1
His station is assigned to a class-of-service (COS) with "Restrict Call Fwd-Off Net" disabled.
I have tried to configure the unconditional forwarding for external and internal calls on page 3, but it failed too.

[szleg4]

Originally Posted by richa164

depends on how you are trying to achieve this are you saying you want calls to hit the C/A group and then at one station ring off net , as with this set up you wont get that.


If you are saying something different have you got trunk to trunk transfer enabled

Thanks for your help richa164.
I confirm the station has got trunk to trunk transfer enabled.
The Customer just wants all the station to ring simultaneously (internal & external) as soon as the call arrives on the phone system. If the external phone rings two rings later it is not a problem for my customer

[mlombardi1]

If there's licensing for EC500, map the station to the external number in the off-PBX table. The station and external number will ring together.

[szleg4]

In order to give you all the information :
- the station has a coverage path to a coverage remote (0 + phone number)
- in the cos, the Extended Forwarding All is set to yes
- when we call directly the station, the external station rings.

[szleg4]

Originally Posted by mlombardi1

If there's licensing for EC500, map the station to the external number in the off-PBX table. The station and external number will ring together.

No EC500 licences. Sorry

[mlombardi1]

What does a trace show when the station is called and goes to remote cover? You can omit the full coverage number. Let's see if it stops at CM or at the trunk.

[szleg4]

Originally Posted by mlombardi1

What does a trace show when the station is called and goes to remote cover? You can omit the full coverage number. Let's see if it stops at CM or at the trunk.

16:03:44 TRACE STARTED 01/19/2015 CM Release String cold-03.0.124.0-20850
16:04:27 Calling party trunk-group 2 member 6 cid 0x53e
16:04:27 Calling Number & Name 156710000 NO-CPName
16:04:27 term station 5599 cid 0x53e
16:04:27 call-forwarding 003
16:04:27 term trunk-group 2 cid 0x53e
16:04:27 dial 00385xxxxxx route:ARS
16:04:27 route-pattern 2 preference 1 location ALL cid 0x53e
16:04:27 seize trunk-group 2 member 11 cid 0x53e
16:04:27 Setup digits 00385xxxxxx
16:04:27 Calling Number & Name 156710000 NO-CPName
16:04:28 Proceed trunk-group 2 member 11 cid 0x53e
16:04:32 idle trunk-group 2 member 6 cid 0x53e