need assistance change IP port to Analog

[danie139]

In a pinch due to down switch and would like to move extensions assigned IP port back to its original Analog port until switch is in place. I know the port name and the location where I would connect the analog phone(8110). When in CM I thought i would do a "change stations xxx but do not have access to port options.

Any assistance would be appreciated.

[aa1]

you need to change the phone type. do these please;

- change station xxx
- in the "Type" field, change it from an IP phone type to an analog type
- now you can change the "Port" field and assign the exact port (for the circuit pack or the media module)

Arbi

[danie139]

That did it...... thanks a lot....

[aa1]

Fantastic. You're welcome. glad it helped

Arbi

[john127]

Hi...i am a new user here. In my case I have tried using a few different ports other than 80 but received the same error regardless of which port I am trying. I am able to remotely view the cameras using the Amcrest app on my devices. I can not view them through a web interface on a PC because when I bring up myip:80 it brings me to my main DVR which this camera has nothing to do with.