SIP trunk for Integration with CUCM 9.1

[guzma48]

Hi All,

Need your help on this. I configured a SIP trunk to integrate an Avaya CM 6.3 with a Cisco CUCM 9.1 using Avaya SES Manager 6.3 between both PBX's.

SIP trunk has been configured and is up and running. Calls from Cisco to Avaya not work, but calls from Avaya to Cisco work fine.

Avaya PBX --> Avaya SES Manager --> CUCM Calls are successful
Dial 253358

CUCM ---> Avaya SES Manager ---> Avaya PBX Calls are not connecting (Fast busy tone)
Dial 124558

Cisco Logs

* |13:06:40.518 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.11.0.X on port 5070 index 96521 with 518 bytes: [13188308,NET] SIP/2.0 404 Not Found (cannot determine routing domain, check SM ports) Call-ID: 53eed580-5ca12ba0-45679-1f3511ac@172.17.53.X CSeq: 101 INVITE From: "Nestor Guzman" ;tag=3779946~4cf3603f-6f51-443e-9348-caf55f28f24f-39593077 To: ;tag=47977755117877274_local.1421732804321_9314382 _9314495 Via: SIP/2.0/TCP 172.17.53.X:5070;branch=z9hG4bK11c3a0583d5000 Av-Global-Session-ID: 5562eea0-404b-11e5-a6fb-f8bc12442780 Server: AVAYA-SM-6.3.9.0.639011 Content-Length: 0 96389262.001 |13:06:40.519 |AppInfo |StationD: (12048893) DEBUG- star_DSetCallState(11) State of cdpc(483088) is 6. 96389269.001 |13:06:40.520 |AppInfo |StationD: (12048893) StartTone tone=37(ReorderTone), direction=0.


Any recommendation for this issue?

Thanks in advance.

[baliy]

Routing towards Avaya PBX may be incorrect or missing.

Provided logs are not giving clear picture of the call. Complete call logs at SM side can explain issue better.

[anton104]

How did u resolve this issue?

[mmauye]

you just needed to configure an h.323 trunk gateway in CUCM