Date and time is a system feature rather than an individual telephone feature, with the exception of ATL, ETR and MLS display sets, which must be programmed on each individual phone.
On 4400- Series, MLX, and TransTalk 9040 (when connected to TDL ports) telephones, the system controls the date and time.
To change the date in the Legend or Magix system, from the System Programming console:
- Press Menu.
- Press System Program.
- Press Exit or Start.
- Press System.
- Press Date.
- Enter date in following format: mmddyy (where MM is the month, DD is the day, and YY is the year).
- Press Enter.
- Press Exit or Back.
- Press Home or Exit to exit programming mode.
To change the date, day or time on an ATL set:
- Press Set until the item you want to change flashes.
- Press Fwd or Rev to advance or reverse the Time, Day or Date.
- When you have the correct Time, Day or Date, press Set.
- If you only want to set a particular item, such as Time, Day, or Date, press Exit after programming it.
- If you have programmed them all (Time, Day and Date) just press Set not Exit. (If you press Exit, you will see four zeroes in the place of the Date. This is for the Timer. Press Exit again to display the corrected Time, Day and Date.)
Note: When you touch the Set button the first time, you will see the word ALARM in the display screen. If the Alarm is not to be set, press the Set button two more times until just the Hours and the A or P (A - AM, P - PM) are flashing in the display window. If you do not need to set a particular item, press Set to bypass it.