IP600: Changing Time on the IP600

If there is a keyboard, mouse and monitor connected to the system the time rules can be changed by doing the following.

1. Double left click on the time that appears on the Taskbar of the desktop.
2. This opens the Date/Time Properties window.
3. In this window, update settings.

If you can connect to the LAN but there is no keyboard, mouse and monitor, use the following procedure to start pcANYWHERE on the desktop to set date and time on the system over your LAN.

1. Start the desktop internet browser.
2. On browser turn off proxies. Write down your settings. You will need them later to restore the system.

Choose the instructions for your browser:

Netscape go to

1. Edit
2. Preferences
3. Advanced Proxies
4. Set to Direct connect to Internet.

Internet Explorer 4.x go to

1. View
2. Internet
3. Options
4. Connection
5. Check Connect to Internet using LAN
6. Uncheck Use proxy server.

Internet Explorer 5.x go to

1. Tools
2. Internet Options
3. Connections
4. At the bottom of the window click LAN Settings
5. Uncheck Use a proxy server box
6. Check Automatically detect settings.
7. Click OK until back at web page.

3. Do an http:// into the IP address assigned to the system.
4. Click on Administer System and login.
5. Start pcANYWHERE on system at the lower portion of the Web page.
6. If the desktop doesn't have pcANYWHERE on browser click Start java client on your computer. Answer yes to the 2 questions asked on the agreement screens. Select the IP600 on the next screen and click Connect. Login.
7. At login use the CAD icon on the top tool bar to bring up login window.
8. Login
9. Scroll the screen down to the IP600 Task Bar and perform the procedure above to set the date and time.

If you connect to the system using Remote Dial In follow these steps.

If you need to dial in remotely, there must be an NT user on the system with dial in permissions. Then follow the steps below.

1. Go to My Computer.
2. Double click on Dial-Up Networking.
3. Double click on Make New Connection.
4. Fill in the name field, the system should fill in the correct modem attached to the pc, if not choose the modem the system has.
5. Click Next.
6. Fill in the Area code and telephone number for the system.
7. Click Next.
8. Click Finish in window saying the connection was created.
9. In the Dial-Up Networking window, right click on your connection icon.
10. Left click on Properties.
11. Click on Server Types tab.
12. In the Type of Dial-Up Server drop down menu select PPP Windows 95, NT 3.5 Internet.
13. In the Allowed network protocols, only TCP/IP should be checked.
14. Click OK when finished.
15. Access the system by double left clicking the connection icon.
16. On the Connect screen, enter User name and password.
17. Click Connect.
18. When connection is made, a screen will pop up. Click on the Continue box.
19. A login window may appear saying connection was successful.
20. Click OK and the dial up connection will drop down to the tray on the Taskbar by the time.
21. Once the dial up has been established, return step 1 of the top section.