Verifying installation of System Platform

Before you begin

To gain access to the System Platform Web Console from a laptop that is connected to the services port, enable IP forwarding. See Enabling IP forwarding to access System Platform through the services port.

About this task

Important

You cannot gain access to Console Domain until the system finishes the first boot process.

After installing System Platform, use this procedure to successfully log on to:

The System Domain (Dom0) command line as root, and run the check_install command.
The Console Domain (Cdom) Web Console as admin.
The Console Domain as cust.

Note

The System Platform installation program installs the Console Domain after installing the System Domain. Availability of the login prompt for the System Domain does not necessarily mean that the Console Domain was installed successfully.

The actions in this procedure collectively help to verify successful installation of System Platform, and identify various issues associated with an unsuccessful installation, as well.

Procedure

Access the System Domain command line.
See Accessing the command line for System Domain.
Enter the command, check_install.
If check_install finds no issues, the following message appears in the command line interface:
```
Cursory checks passed.
```
If check_install command indicates a problem, wait a few minutes and run the command again. If the problem persists, contact Avaya using any of the technical support options at http://support.avaya.com.
Type exit to exit root login.
Type exit again to exit the System Domain.
Access the System Platform Web Console. See Accessing the System Platform Web Console.
Perform the following steps to log in to Console Domain as admin:
1. Start PuTTY from your computer.
2. In the Host Name (or IP Address) field, type the IP address of Console Domain.
3. In the Connection type field, select SSH, and then click Open.
4. When prompted, log in as admin, and type the password that you entered for the admin login during System Platform installation.
5. Type exit to exit Console Domain.
Perform the following steps to log in to Console Domain as cust:
1. Start PuTTY from your computer.
2. In the Host Name (or IP Address) field, type the IP address of Console Domain.
3. In the Connection type field, select SSH, and then click Open.
4. When prompted, log in as cust, and type the password that you entered for the cust login during System Platform installation.
5. Type exit to exit Console Domain.
Important
If you cannot log in to Console Domain as admin or cust or access the System Platform Web Console, contact Avaya using any of the technical support options at http://support.avaya.com.