|
|
|
|
|
|
The shmview command is used to display internal shared memory segments maintained by the IRAPI and run time systems.
Synopsis
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description
Options for the shmview command are as follows:
Option |
Description |
-g |
Displays the Global Parameter Data |
-t |
Displays the Trace Control Structure |
-b |
Displays the Trace Buffers |
-d |
Displays the Device Table |
-D |
Displays the AD DNIS/ANI Active List |
-E |
Displays the Event Monitor Table |
-f |
Displays the AD DNIS/ANI Free List |
-m |
Displays the Monitor Map Table |
-p |
Displays the SWIN Service Provider Table |
-k |
Displays all Shared Memory Keys in hex |
-rchans |
Displays the real channels on the system |
-vchans |
Displays the virtual channels on the system |
-pchans |
Displays the purchased channels on the system |
-bchans |
Displays the busy channels on the system |
-memsize |
Displays the amount of memory on the system |
-sysmon |
Displays the sysmon snapshot data |
-e egrplist |
Displays the Equipment Groups |
-a chanlist |
Displays the AD Channel Table for channels chanlist |
-c cardlist |
Displays the Card Table for cards cardlist |
-C chanlist |
Displays the Channel Table for channels chanlist |
-F filename |
Displays devtbl entries from a devtbl named file |
-s bufList |
Displays VROP speech buffer control data |
-S bufList |
Displays VROP speech buffer control data and contents |
-v filename |
Displays VROP speech buffer control data for filename |
-i interval |
Displays every interval seconds |
-M ServerList |
Displays the System Server Table for ServerList |
Example
The following example shows the global parameters structure.
shmview -g
Global Parameters Structure
�-------------------------------------------------------
IRP Valid = VALID (0xcafe)
Dnis Wait Retries = 2
Analog Loss Compensation = 0
Digital Loss Compensation = 0
Background Output Volume = 33
Virtual Channels = 0
AD Read-Only Flag = 0
Xfer Sec Read-Only Flag = 0
Number of Trace Buffers = 4000
Non-AD Channels =
AD Channel Table = /vs/data/ad_channel_table
AD DNIS/ANI Table = /vs/data/ad_dnisani_table
Xfer Allow Table = /vs/data/xfer_allow_table
Xfer Deny Table = /vs/data/xfer_deny_table
Speech Directory = /home2/vfs/talkfiles
AD DNIS/ANI Table size = 1500 (only used for creation)
Xfer Allow Table size = 0 (only used for creation)
Xfer Deny Table size = 0 (only used for creation)
Max. SWTTS DIOs = 0
Message Max. = 20480
Idle Hunt = 0
TipRing Glare Timeout = 5
TipRing Ignore TT Glare = 0
DTMF Connection Tone = C
DTMF Disconnection Tone = D
Max. Event Monitors = 5
RM PROFILE_SIZE = 6000
Release Talk Slot = 1
Static Timeslots = 1
Log Event Mask = 0x0
UCID Network Node Id. = 1234
CPU Card Number = 31
Default Play/Code Algo = UNKNOWN ALGORITHM (-1) (-1)
DSP Voice Type = -1
DSP TTS Type = -1
DSP Echocan Type = -1
DSP CCA Type = 2
DSP FAX Type = 4
DSP Wholeword Type = -1
DSP Flexword Type = -1
Number Translation Flag = 0
Transfer Restriction Flag = 1
Incall Restriction Flag = 2
Outcall Restriction Flag = 1
Proxy Resource Cards = 0x0
