- Enter list measurements
feature day at the
enter command: prompt.
The system displays the
Feature Daily Traffic screen.
- Write down the
current number of remote users.
- Press F6
(Cancel).
The cursor returns to
the command line.
- Enter get remote-updates
remote_machine_name at the
enter command:
prompt, where remote_machine_name is the name of a system that
shares the network with your local system.
The system displays the
Remote Update Request screen.
- Press Enter
to begin the remote update, or press F6 (Cancel) to cancel
the update.
The system begins the
remote update.
|
Note: The update
might take some time, possibly hours, depending on the number
of users on the remote system. Avoid running the remote update
during prime time hours.
|
- When the remote
update is complete, enter
list remote-extensions remote_machine_name at the enter
command: prompt, where remote_machine_name is the name
of a system that shares the network with your local system.
The system displays the
List Remote Extensions screen.
- Check that the
remote users are listed on the local system.
- Enter list
measurements feature day at the
enter command: prompt.
The system displays the
Feature Daily Traffic screen.
- Verify the new
number of remote users.
- Enter display
administrator's-log at the
enter command: prompt.
The system displays the
Administrator's Log screen.
- View the Administrator's
Log to verify that no conflicts or problems occurred with the remote
update.
- Press F1
(Cancel).
The cursor returns to
the command line, and the system displays the following message:
Command Successfully
Completed.
- Enter exit
or another administrative command at the
enter command:
prompt.
