Adding a Remote User Manually

Running a remote update can use one of your networking ports for quite some time. If you want to add a remote user immediately but do not want to run a remote update, you can add that user manually.

 

To add a remote user manually:

1. Log in to the INTUITY AUDIX command prompt screen.
   

   The system displays the AUDIX command prompt screen.

2. Enter add remote-subscriber machine_name at the enter command: prompt, where machine_name is the name of the remote machine on which the remote user is administered.
    

Tip: To see a list of remote systems, use the list machines command as described in Viewing a List of Machines.

The system displays the Remote Subscriber screen.

3. Complete the fields on this screen by using the information provided in the table for Field Definitions: Remote Subscriber screen.

4. Press F3 (Enter) to save the information in the system database.

The cursor returns to the command line, and the system displays the following message:

Command Successfully Completed.

5. Repeat Step 2 through Step 4 for each remote user you need to add.

6. Enter exit or another administrative command at the enter command: prompt.

Top of page