Overview of Prerequisites
This topic covers the following items:
S8300 Installation Document
To perform many of the tasks in this installation, you need S8300 installation
instructions contained in Installation and Upgrades
for the Avaya� G700 Media Gateway controlled by an Avaya� S8300 Media
Server or an Avaya� S8700 Media Server, 555-234-100 Issue 2.
You can get this document from the Product Documentation website accessible
at avaya.com/support or from the S8300
Media Server and S8700 Media Server Documentation Library CD,
555-234-825.
Intended Audience
This book is intended primarily for the on-site technical personnel
who are responsible for installing the system and performing initial
administration and acceptance testing.�However, the general precautions
are intended for both installers and system administrators.
Safety and Security Alert Labels
This documentation uses the following symbols to call
your attention to potential problems that could cause personal injury,
damage to equipment, loss of data, service interruptions or breaches
of toll fraud security.
Indicates
the presence of a hazard that, if not avoided, can or will cause minor
personal injury or property damage, including loss of data.
Indicates
the presence of a hazard that, if not avoided, can cause death or severe
personal injury.
Indicates
the presence of a hazard that, if not avoided, will cause death or severe
personal injury.
FCC Statement��
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC rules.�
These limits are designed to provide a reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.� This equipment generates, uses, and can radiate radio-frequency
energy and, if not installed and used in accordance with the instruction
manual, can cause harmful interference to radio communications.� Operation
of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference
at his or her own expense.
DOC Interference Information
This digital apparatus does not exceed the Class A limits for radio
noise emissions set out in the radio interference regulations of the
Canadian Department of Communications.
Le pr�sent appareil nom�rique n��met pas de bruits radio�lectriques
d�passant les limites applicables aux appareils num�riques de la Classe
A pr�scrites dans le reglement sur le brouillage radio�lectrique �dict�
par le minist�re des Communications du Canada.
CWY1 Board Kit Contents
|
Do not handle the CWY1 board unless you are wearing a grounding
wrist strap or have performed another method of preventing electro-static
discharge (ESD) and are prepared to place the board on a static-free
surface.
|
The complete CWY1 board kit
contains the following components (verify that you have all of these
components before beginning the installation procedure):
- CWY1 Ser2 board
- Three (3) screws
- Three (3) standoffs
Required Tools
You also need the following tools:
- Phillips screwdriver
- Flathead screwdriver
- ESD-preventing wrist strap
Saving Packing Materials
Save the shipping carton and all
packing materials to use in case you have to return the system to the
manufacturer. If you ordered multiple systems, saving one carton and
one set of packing materials will be sufficient. Packing materials include:
- Antistatic bags
- Cardboard and foam inlays
|
Note: The packing
materials also can include a plastic bag that is designed
to protect the system from moisture during shipment. Discard
this bag. It is not reusable.
|
