Use the following procedure to send a voice message
to a user on a remote system that is administered on the local INTUITY
system.
For acceptance tests, you must administer two test subscribers for
each remote machine. For example, if you plan to network with four remote
machines named CB1, CB2, CB3, and CB4, you need to administer two test
subscribers on each machine. During acceptance testing, you address
voice messages to each of those test subscribers. See Remote
User Administration for information on administering remote users
on the INTUITY system.
To send a test message to a remote user:
- Dial the INTUITY
AUDIX voice messaging extension.
- When prompted to
enter an extension, use the telephone keypad to enter a local test
subscriber extension followed by #.
- Enter the password
for the local test subscriber followed by #.
You hear the Avaya INTUITY
Activity menu.
- Press 1 to record
a message.
At the tone, say the following:
"This is a test message
from <your name>. Please call me to verify that you have received
this message. My number is <your number>."
- Press # when you
stop recording and approve the message.
After you approve the message,
you hear the following prompt:
"Enter extension
and pound sign. When finished addressing, press pound."
- Enter the address
for a remote test subscriber followed by #. The address includes the
prefix, if any, and the extension of the remote test subscriber.
After you press #, the
remote machine repeats the remote test subscriber extension you entered.
- Repeat Step 6 for
each remote test subscriber on each remote machine.
- When you complete
entering remote test subscriber addresses, press #.
You hear the following
prompt:
"To send message,
press pound, or enter a delivery option. To hear a list of options,
press 0."
- Press # to send
the message.
The system schedules the delivery and returns
you to the activity menu.
- Hang up the telephone.
- Continue with
Receiving Voice Messages from Remote Test
Subscribers.
Top of page
