Each of these
events is generated by the VM application and indicates a problem with
the voice messaging system:
VP AUDIX_FS0004
Description:
AUDIX voice messaging files were corrupted.
Subscribers cannot send or receive messages. Subscribers might be hearing
"System experiencing difficulties."
This alarm might occur if the system crashed or if AUDIX
was not shut down gracefully.
Repair Procedure:
- Stop the messaging
software (voice system).
- Start the messaging
software (voice system).
- Verify that users can create and retrieve messages. If users cannot
create and retrieve messages, contact your remote support center.
VM RPCTEST000
Description:
The INTUITY AUDIX LX system resets
the operating system's RPC processes if this event occurs four times within
1 hour. If RPC cannot be reset, the system issues a VM
RPCTEST 001 Minor alarm.
Repair Procedure:
No corrective action is necessary.
VM SOFTWARE0006
Description:
An INTUITY AUDIX port process failure occurred.
Repair Procedure:
No corrective action is necessary.
VM
SOFTWARE0200
Description:
A restartable INTUITY AUDIX process failed to initialize.
The system attempts to restart the process every 5 minutes. This event
remains active until the process successfully initializes, and then the
event automatically resolves.
If this event is logged three times within the hour, the system raises
a single software VM SOFTWARE 203
alarm.
This event usually indicates a problem with the system's
IMAPI administration.
Repair Procedure:
VM
SOFTWARE0202
Description:
An INTUITY AUDIX restartable process failed. When this
alarm occurs, the failed process is automatically restarted. The event
remains active until the process successfully initializes, and then the
event resolves automatically. If this event is logged a second time within
the hour, the system raises a single VM
SOFTWARE 204 minor alarm.
This event usually indicates a problem with the system's IMAPI administration.
Repair Procedure:
VM SOFTWARE0206
Description:
An INTUITY AUDIX port process failure occurred.
Repair Procedure:
No corrective action is necessary.
VM VM_PT0000
Description:
An INTUITY AUDIX port process has stopped and has been restarted.
Any call in progress on that port has been dropped.
Repair Procedure:
No corrective action is necessary.
VM VM_PT0001
Description:
An INTUITY AUDIX port process initialization failure has
occurred. The process has been restarted.
Repair Procedure:
No corrective action is necessary.
VM VM_PT0006
Description:
An INTUITY AUDIX port process failure occurred.
Repair Procedure:
No corrective action is necessary.