PBX Configuration - SIP Tab (IP SIP)

Use the PBX Configuration dialog box, SIP tab to configure the gateway addresses and the incoming and outgoing phone number translation rules for a voice mail domain.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the IP SIP PBX. The system displays the PBX Configuration dialog box for the selected PBX, with the General tab active.

Click the IP SIP tab.

Configuring the Screen Controls

Gateway Addresses Enter the IP address or FQDN for the gateway. This is the IP address that MASs use to communicate with the PBX. Select the checkbox preceding the IP address/FQDN to enable the gateway for the selected PBX.

Adds a new entry to the Gateway Addresses list box.

Removes the selected entry from the Gateway Addresses list box.

TCP/TLS Enter either TCP or TLS, depending on which protocol the gateway uses to communicate with the MAS. The default is TLS. Avaya recommends TLS because it is secure, but the gateway must be configured to use it.

MWI Select to enable the Message Waiting Indicator feature. The checkbox is selected by default. If this checkbox is not selected for the gateway, MWI is considered to be disabled for that gateway.

SRTP Specifies the security level for communication between the gateway and the PBX. Double-click the entry and select High, Low, or None. The default is High.

P-Asserted Identity Enter an extension number with an optional domain name, for example, [email protected]. This extension number is used by the PBX to grant appropriate permissions to Modular Messaging. This field is optional and is only applicable if your PBX is Avaya Communication Manager.

SIP Domain Enter the fully qualified domain name that is assigned to the SES Server.