Configuring general PBX properties (Set Emulation) (MAS Admin)

In the Voice Mail System Configuration window, choose the voice mail domain.

Choose PBXs.

Choose the PBX you want to configure.

Select the General - PBX (Set Emulation) property page.

The following figure shows the default values for the Nortel Networks M-1 PBX type.

To configure General - PBX (Set Emulation) properties

Complete the following fields in the General - PBX (Set Emulation) property page:

DTMF Inter-Digit Delay during Dialing (ms). Enter the duration, in milliseconds, between DTMF tones during detection. The range is 1 through 999 and the default is 80.

DTMF Length during Dialing (ms). Enter the duration, in milliseconds, of a DTMF tone when dialing. The range is 10 through 999 and the default is 80.

DTMF Length during Detection (ms). Enter the length, in milliseconds, of a DTMF tone during detection. The range is 1 through 9999 and the default is 50.

Port Disable Key. Select the key used to disable the port on a MAS. When disabled, the PBX cannot send calls to that port and the port cannot make outgoing calls. The default is C.

Note: The Port Disable Key field is not available with G3 switches.

Configuring general PBX properties (Set Emulation)

To display the General - PBX (Set Emulation) property page

To configure General - PBX (Set Emulation) properties