Configuring intercom paging properties (MAS Admin)

Use the Intercom Paging property page to configure PBX intercom paging properties for a voice mail domain. Using intercom paging, callers can page subscribers in the building if they do not answer their extensions.

Enable Intercom Paging. Select to allow a caller to page subscribers in the building if they do not answer their extension. This check box is not selected by default.

Intercom Paging Code. Enter the intercom paging code sent to the PBX to start intercom paging, if required by the PBX. This field is blank by default.

Release Code for Intercom Paging. Enter the code sent to the PBX to stop intercom paging. This field is blank by default.

Repeat Intercom Paging Phrase. Select to get the automated attendant to play the intercom paging phrase (“there is a call for <subscriber's name>”) twice instead of once. This check box is not selected by default.

Number of Retries when Paging System is Busy. Enter a number to specify the number of times the voice mail system attempts to page a subscriber when met by a busy response. The range is 0 through 9 and the default is 3.

Number of Retries when No Answer. Enter a number to specify the number of times a caller can choose to page a subscriber whose extension is not answered. The range is 0 through 9 and the default is 3.

Paging Wait Time (sec). Enter the number of seconds a caller is kept on hold after paging a subscriber. The range is 0 through 99 and the default is 10.

Configuring intercom paging properties

To display the Intercom Paging property page

To configure intercom paging properties