Migrating to an S8700 Media Server

Migrations from the DEFINITY R, DEFINITY SI, DEFINITY CSI and S8100 Media Server are supported to an S8700 Media Server configuration. The following describes a high-level migration from the DEFINITY R, DEFINITY SI, DEFINITY CSI and S8100 Media Server platforms:

• DEFINITY R: (Multi-Connect only)
• All control circuit packs are removed and replaced with an IPSI (TN2312BP) circuit pack.
• The PPN control carrier must be replaced with an EPN control carrier.
• MCC1 EPN cabinets migrate to a MCC1 PNs
• Voice announcements must be on a VAL board or migrate to a VAL board.
• DEFINITY SI: (Multi-Connect only)
• All control circuit packs are removed and replaced with an IPSI (TN2312BP) circuit pack.
• SCC1-SPE cabinet is removed and replaced with an SCC1 EPN or the G650 Media Gateway.
• SCC1 EPN cabinets migrate to a SCC1 PNs
• Voice announcements must be on a VAL board or migrate to a VAL board.
• DEFINITY CSI: (IP-Connect only)
• The CSI Media Server (TN798 or the TN2402) and the Tone Clock (TN2182) are removed and an IPSI (TN2312BP) circuit pack is installed in slot A02.
• Voice announcements must be on a VAL board or migrate to a VAL board.
• S8100 Media Server in a G600 Media Gateway or a CMC1 Media Gateway: (IP-Connect only)
• The S8100 Media Server (TN795) is removed and replaced with an IPSI (TN2312BP) circuit pack (slot A02).
• The Tone Detector (TN744) is removed.
• The S8100 Media Server runs Intuity Audix co-resident. In the event of a migration the subscriber data and voice files must be retranslated to an external voice messaging solution.
• Voice announcement must be on a VAL board or migrate to a VAL board.