|
|
|
Specifies the interfaces on which SPAN data will be received.
monitor interface [ ethernet0 | ethernet1 | gigabitEthernet0 | gigabitEthernet1 ] no monitor interface [ ethernet0 | ethernet1 | gigabitEthernet0 | gigabitEthernet1]
Requires the optional EFC module. Must be in EFC configuration mode (config-efc), which requires privileged-level access.
Available for use multiple times in the configuration.
Use the monitor interface command to set the interfaces used by the optional EFC module to receive SPAN data. If this is not specified, then all interfaces will be monitored by the EFC.
Use the no form of the command to remove an interface previously specified.
See the interface command for information about assigning an IP address to the interface.
See the netflow interface command for information about receiving Netflow data.
|
|
|