netflow interface

Specifies the interface on which Netflow data will be received.

Syntax

netflow interface [ ethernet0 | ethernet 1 ]
 
no netflow interface

Prerequisites

Must be in EFC configuration mode (config-efc), which requires privileged-level access.

Occurrence

Use once.

Default

ethernet0

Description

Use the netflow interface command to change the interface used by the optional EFC module to receive Netflow data.

Use the no form of the command to restore the default.

See the interface command for information about assigning an IP address to the interface.

See the monitor interface command for information about receiving SPAN data.