neighbor remote-as

Adds an entry to the BGP neighbor table.

neighbor <address> remote-as <number>
 
no neighbor <address>
 

• address--IP address of the BGP neighbor, in dotted decimal format (a.b.c.d)
• number--neighbor’s Autonomous System (AS) number; integer in the range 1 through 65,535

Must be in BGP configuration mode (config-engine-bgp), which requires privileged-level access.

Available for use multiple times in the configuration.

The neighbor remote-as command creates a new BGP neighbor block to the running configuration.

Use the no form of the command to clear all lines in the block from the configuration.