netflow source

netflow source

Specifies the IP address of the router interface from which Netflow data originates.

Syntax

netflow source <address> [ version <string> ]
 
no netflow source [ <address> ]

Arguments

address--IP address (a.b.c.d format)
string--’5’ and ‘7’ are currently supported

Prerequisites

Must be in EFC configuration mode (config-efc), which requires privileged-level access.

Occurrence

Use once.

Description

Use the netflow source command to specify the IP address on the router from which Netflow data originates. You can specify multiple Netflow sources.

CAUTION: If you do not use this command, then the EFC will accept netflow data from all sources.

Use the version keyword to specify which netflow version (either ‘5’ or ‘7’)will be accepted by CNA. If you omit this keyword, then both version 5 and version 7 will be accepted.

Use the no form of the command with an IP address to remove a specific source. Use the no form of the command with no address to remove all sources.