|
|
|
Specifies the UDP port on which Netflow data will be received by the EFC module.
netflow port <number> no netflow port
Must be in EFC configuration mode (config-efc), which requires privileged-level access.
Available for use multiple times in the configuration.
Ports 9995 and 9996 will be open by default
Use the netflow port command to specify the UDP port number on which the optional EFC module will receive Netflow data. This port number must match the Netflow target port number configured on the router.
Use the no form of the command to remove the port designation (which will shutdown the receipt of Netflow data).
See the interface command for information about assigning an IP address to the interface.
See the monitor interface command for information about receiving SPAN data.
Must be in EFC configuration mode (config-efc), which requires privileged-level access.
|
|
|