|
|
|
Enables polling of edge routers to determine status of BGP peering relationship.
polling bgp-status on no polling bgp-status on
You must be in link configuration mode (config-engine-link), which requires privileged-level access.
Polling for BGP status is disabled.
When polling for BGP status is enabled, CNA will contact the edge router at regular intervals to evaluate the status of the BGP peering relationship. CNA’s decision-maker process will use this information to help determine whether a prefix is experiencing a network outage.
The frequency at which the edge router will be polled for BGP status is determined by the polling bgp-status interval command.
Use the no form of the command to disable polling for BGP status.
|
|
|