polling interface-ip-address (deprecated)

See the new command: polling interface. Tells CNA which interface to poll, using the IP address of the edge router’s ISP-facing interface.

polling interface-ip-address <address>
 
no polling interface-ip-address
 

address--edge router’s ISP-facing IP address

Must be in link configuration mode (config-engine-link), which requires privileged-level access.

Use once per link.

When SNMP agents on edge routers, CNA needs to know which interface to contact. The device will use whichever of the following you have set (use only one in the CNA configuration):

• the interface’s ifDescr MIB variable (use the CNA command polling interface-description)
• the interface’s ifIndex MIB variable (use the CNA command polling interface-index)
• the edge router’s ISP-facing IP address (use the CNA command polling interface-ip-address)

Use the no form of the command to clear the association between the link and an SNMP configuration block.

You can also configure a separate interface for polling a different SNMP agent for BGP status. See the polling bgp-status snmp-agent command.