show cell

show cell

Displays a tabular report of the test results between cells.

Syntax

show cell [test {rtp | ping | tcp} [variable {cerror | delay | drops | jitter | inter-arrival-time | loss | rtt}]] [from <zone-name> to <zone-name> [all-datapoints]]

Arguments

Table 37: show cell arguments
Option or argument	Description
test {rtp \| ping \| tcp}	Test for which you want to view test measurements. Options are: RTP, Ping, or TCP.
variable {cerror \| delay \| drops \| jitter \| inter-arrival-time \| loss \| rtt}	Specific test variable for which you want to view test measurements. Options are: l RTP: - Delay - Drops - Jitter - Loss - Inter arrival time Ping - Round trip time - Loss - Inter arrival time - Drops l TCP - Delay - Cerror - Inter arrival time - Drops
from <zone-name>	Source zone of the cell for which you want to view test measurements. You can enter a fully qualified zone name or a specific zone name.
to <zone-name>	Destination zone of the cell for which you want to view test measurements. You can enter a fully qualified zone name or a specific zone name.
[all-datapoints]	Important: To use the all-datapoints option, you must specify both a test variable and cell. You cannot display all data points for all cells or all tests in one report Displays test results for all available CNA agents in the cell. This option displays the data used to generate the historical data plot. See all-datapoints option.

Prerequisites

Must be in Privileged command mode.

Description

Displays a tabular report of the test results between cells. If you do not specify a cell, test results are displayed for all cells in the agent-based measurement network. For a definition and examples of cells, see Agent-based measurement tests in Chapter 5: Configuring Agent-Based Measurement of the CNA Basic Monitoring Guide.

To display the results for a specific test variable, specify the test variable. By default the command displays test results for all tests.

Report display

The report consists of one row per test per cell. For each test, the following criteria are displayed:

Absolute alarm state
Relative alarm state
Minimum measurement
Median measurement
Maximum measurement
Average measurement

Sample reports

Table 38 shows a sample report for the show cell command. This command displays data for all currently active tests for all cells.

Table 38: sample output for show cell command
Parent Zone	From Zone	To Zone	Test Name	Test Variable	Absolute	Relative	Min	Median	Max	Avg
US	APAC	EMEA	RTP	Delay (ms)	Above	Rising	47	140	342	120
US			RTP	Jitter (ms)	Below
			RTP	Loss (%)	Above	Rising
			RTP	Drops (%)	Below	Steady
			RTP	Inter Arrival Time (secs)	Steady
			Ping	RTT (ms)	Steady
			Ping	Drops (%)	Below
			Ping	Loss (%)	Above
			Ping	Inter Arrival Time (secs)	Steady
US	EMEA	Europe	. . .
	. . .	. . .
California	Milpitas	Concord	. . .

Table 39 shows a sample report for the show cell test ping-rtt command. This command displays Ping RTT test measurements for all cells.

Table 39: sample output for show cell test ping-rtt command
Parent Zone	From Zone	To Zone	Test Name	Test Variable	Absolute	Relative	Min	Median	Max	Avg
US	APAC	EMEA	Ping	RTT	Above	Rising	47	140	342	120
					Below
					Above	Rising
					Below	Steady
					Steady
					Steady
					Below
					Above
					Steady
US	EMEA	Europe	Ping	RTT
	. . .	. . .
California	Milpitas	Concord	Ping	RTT

Table 40 shows a sample report for the show cell from APAC to EMEA command. This command displays data for all currently active tests between the APAC and EMEA zones.

Table 40: sample output for show cell from APAC to EMEA command
Parent Zone	From Zone	To Zone	Test Name	Test Variable	Absolute	Relative	Min	Median	Max	Avg
US	APAC	EMEA	RTP	Delay (ms)	Above	Rising	47	140	342	120
US	APAC	EMEA	RTP	Jitter (ms)	Below
US	APAC	EMEA	RTP	Loss (%)	Above	Rising
US	APAC	EMEA	RTP	Drops (%)	Below	Steady
US	APAC	EMEA	RTP	Inter Arrival Time (secs)	Steady
US	APAC	EMEA	Ping	RTT (ms)	Steady
US	APAC	EMEA	Ping	Drops (%)	Below
US	APAC	EMEA	Ping	Loss (%)	Above
US	APAC	EMEA	Ping	Inter Arrival Time (secs)	Steady

Table 41 shows a sample report for the show cell test rtp-jitter from APAC to EMEA command. This command displays RTP jitter test measurements between the APAC and EMEA zones.

Table 41: sample output for show cell test rtp-jitter from APAC to EMEA command
Parent Zone	From Zone	To Zone	Test Name	Test Variable	Absolute	Relative	Min	Median	Max	Avg
US	APAC	EMEA	RTP	Jitter	Above	Rising	47	140	342	120

Table 42 shows a sample report for the show cell test rtp-jitter command. This command displays RTP jitter test measurements for all cells.

Table 42: sample output for the show cell test rtp-jitter command
Parent Zone	From Zone	To Zone	Test Name	Test Variable	Absolute	Relative	Min	Median	Max	Avg
US	APAC	EMEA	RTP	Jitter	Above	Rising	47	140	342	120
US	EMEA	Europe	RTP	Jitter	Below
	. . .	. . .	RTP	Jitter
California	Milpitas	Concord	RTP	Jitter	Stale	Stale	23	30	44	35

all-datapoints option

Use the all-datapoints option to display test results for all available CNA agents in the cell.This option displays the data used to generate the historical data plot in the Web interface. When you use this option, the resulting report contains the following columns:

Time Since
Value
From CNA Agent
To CNA Agent
Absolute
Absolute Strikes
Relative
Relative Strikes

For example, the following command displays the data used to generate the scatter plot for a cell: show cell test rtp-delay from Milpitas to Concord all-datapoints