|
|
|
Displays a tabular report of the test results for a specific edge or all edges in your agent-based measurement network.
show edge [test {rtp | ping | tcp | traceroute} [variable {delay | jitter | loss | inter-arrival-time | rtt | cerror | hop-rtt}]] [from <ip-address> to <ip-address> [all-datapoints]]
| Argument |
Description |
|---|---|
Test for which you want to view test measurements. Options are: RTP, Ping, TCP, or Traceroute. |
|
Specific test variable for which you want to view test measurements. Options are: |
|
Source IP address of the edge for which you want to view test measurements. |
|
Destination IP address of the edge for which you want to view test measurements. |
|
Important: To use the all-datapoints option, you must specify both a test variable and an edge. You cannot display all data points for all edges or all tests in one report Displays test results for all available CNA agents on the edge. This command displays the data used to generate the historical data plot. For more information, see all-datapoints option. |
|
Must be in Privileged command mode.For information on how to access this mode, see Accessing and exiting command modes.
Displays a tabular report of the test results for an edge. If you do not specify an edge, test results are displayed for all edges in your agent-based measurement network.
To display the results for a specific test variable, specify the test variable. By default the command displays test results for all tests.
The report consists of one row per test per edge. For each test, the following criteria are displayed:
Use the all-datapoints option to display test results for all available CNA agents on the edge. This option displays the data used to generate the historical data plot in the Web interface. When you use this option, the resulting report contains the following columns:
For example, the following command displays the data used to generate the scatter plot for a cell:
show edge test rtp variable delay from 10.10.10.1 to 10.10.11.1 all-datapoints
|
|
|