show zone
Displays a tabular report of test results between subzones of a zone.
show zone
[name <zone-name>] [test {rtp-delay | rtp-jitter | rtp-loss | rtp-inter-arrival-time | rtp-drops | ping-rtt | ping-loss | ping-inter-arrival-time | ping-drops | tcp-delay | tcp-cerror | tcp-inter-arrival-time | tcp-drops}]
[criterion {relative | absolute | median | minimum | maximum}]
Table 48: show zone arguments
| Argument |
Description |
|
|
Zone for which you want to view test measurements. You can enter a fully qualified zone name or a specific zone name. The default value is the root zone.
|
[test {rtp-delay | rtp-jitter | rtp-loss | rtp-inter-arrival-time | rtp-drops | ping-rtt | ping-loss | ping-inter-arrival-time | ping-drops | tcp-delay | tcp-cerror | tcp-inter-arrival-time | tcp-drops}]
|
Specific test variable for which you want to view test measurements. Options are:
|
|
|
Displays status of test measurements in context of the test’s relative thresholds.
For example, if the measurements are consistently falling within the upper and lower thresholds, the report displays Steady.
NOTE: Relative alarms are generated when the most recent results for a specific test show an abrupt increase or decrease. The thresholds for determining an “abrupt increase or decrease” are self-adjusting thresholds based on a statistical technique. Note that if the measurement remains near or outside the threshold, the threshold adjusts to reflect this changed norm. Once the threshold self-adjusts, the alarm clears even though the measurement itself has not changed. The steady state becomes the threshold value. This value can be higher or lower than the configured threshold.
|
|
|
Displays status of test measurements in context of the test’s absolute threshold.
For example, if the measurements are consistently below the absolute threshold, the report displays Ok.
|
|
|
Displays median of test measurements.
|
|
|
Displays minimum of test measurements.
|
|
|
Displays maximum of test measurements.
|
|
|
Must be in Privileged command mode.
Table 49: Default settings show zone command
| Argument |
Default setting |
|
|
|
|
|
|
Displays a tabular report of test results between subzones of a particular zone. To display the results for a specific test variable, specify the test variable. By default the command displays test results for the first active test measurements in the list.
Table 50 shows a sample report for zone AV, RTP delay median.
Table 50: Sample output for show zone
|
APAC
|
AVBackbone
|
CALA
|
EMEA
|
US
|
APAC
|
|
|
|
|
|
AVBackbone
|
125
|
|
|
|
|
CALA
|
|
87
|
|
|
|
EMEA
|
|
|
|
|
59
|
US
|
|
|
|
|
|
