Configuration Summary

After adding the previously defined example commands, your configuration should contain the following configuration blocks:

interface FastEthernet 1/0
 
 description “EFC Netflow data listener”
 
 ip address 172.16.1.173 255.255.255.0
 
 end
 
!
 
interface FastEthernet 1/1
 
 description “EFC SPAN data listener”
 
 ip address 172.16.1.174 255.255.255.0
 
 end
 

!

...

ip access-list filter-traffic
 
 remark “Let web traffic through”
 
 permit tcp any any port 80
 
 permit tcp any port 80 any
 
 remark “Drop telnet traffic”
 
 deny tcp any port 23 any
 
 deny tcp any any port 23
 
 end
 
!
 
...
 
module engine
 
 ...
 
 active-measurement group efc_targets
 
  ...
 
  efc enable
 
  efc filter filter_traffic
 
  efc source netflow 192.168.1.16
 
  efc bytes top 3
 
  end
 
 end
 
!
 
module efc
 
 netflow source 192.168.1.15
 
 netflow port 9995
 
 end
 
netflow enable
 
!