show cell command

show cell command

Procedure

To view test results for a cell:

Access Privileged mode. To access this mode, enter the following command: enable.
At the hostname# prompt, enter the following command:

show cell [test {rtp | ping | tcp} [variable {cerror | delay | drops | jitter | inter-arrival-time | loss | rtt}]] [from <zone-name> to <zone-name> [all-datapoints]]

If you do not specify a cell, test results are displayed for all cells. To display the results for a specific test variable, specify the test variable. By default the command displays test results for all tests.

For more information on this command, see show cell in the CNA Command Reference Guide.

Tip: You can also use the Web interface to enter this command. In the Quick Links panel, click Show Commands. And then, in the Information panel, click Chatter. Use the drop-down list to select show cell and the Options button to enter options for the command.