show edge command

show edge command

Procedure

To view test results for a specific edge or all edges in the hive:

Access Privileged mode. To access this mode, enter the following command: enable.
At the hostname# prompt, enter the following command:

show edge [test {rtp | ping | tcp | traceroute} [variable {delay | jitter | loss | inter-arrival-time | rtt | cerror | hop-rtt}]] [from <ip-address> to <ip-address> [all-datapoints]]

If you do not specify an edge, test results are displayed for all edges. To display the results for a specific test variable, specify the test variable. By default the command displays test results for all tests.

For more information on this command, see show edge in the CNA Command Reference Guide.

Tip: You can also use the Web interface to enter this command. In the Quick Links panel, click Show Commands. And then, in the Information panel, click Chatter. Use the drop-down list to select show edge and the Options button to enter options for the command.