 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DEFINITY Made Easy Tools
Issue 2, November 2000
Add IP Solutions
Installing a TN802B in Media Processor Mode
To operate in MedPro mode, you must install the TN802B IP Interface and, if the system does not have one, you must also install and administer a TN799B/C C-LAN circuit pack. For C-LAN administration, refer to DEFINITY Enterprise Communications Server Release 9 Administration for Network Connectivity.
If you have existing TN802 IP Interface circuit packs, you can upgrade them either by replacing the circuit pack with a TN802B or by downloading the TN802B firmware onto the circuit packs (see Upgrade to TN802B (R8)).
Task list: Install the TN802B in Media Processor mode
- Prepare for Installation
- Check your shipment
- Connect the Cables for TN799B/C
- Connect the Cables for TN802B
- Connect the Modem
- Connect the Ethernet
- Install the Circuit Packs
- Administer the TN799B/C C-LAN
- Administer the IP Interface
- Test the External Connection to the LAN
|
|
|
|
|
|
|
|
|
|
| Copyright� 2000 Avaya Inc |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |