DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



Add IP Solutions

Installing a TN802B in IP Trunk Mode

Return to Task List


Note: IP Trunk mode should only be used to maintain compatibility with existing Release 7 IP Trunk or ITS-E installations. We strongly recommend that MedPro mode be used whenever possible.

Task list: Install the TN802B in IP Trunk mode

  1. Prepare for Installation

  2. Check your Shipment

  3. Connect the Cables for TN802B

  4. Connect the Modem

  5. Connect the Monitor, Keyboard, and Mouse

  6. Connect the Ethernet

  7. Install the Circuit Pack

  8. Test the Modem

  9. Administer the IP Interface

  10. Log onto the TN802B Interface Server

  11. Change Mu-Law to A-Law (for systems using A-Law companding only)

  12. Assign Server and Domain Names

  13. Assign an IP Address

  14. Assign Default Gateway if you use gateways.

  15. Check Network Services

  16. Test the External Connection to the LAN

  17. Test the IP Interface Onboard LAN Connections

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.