DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



Install Additional Hardware

Administer Customer Options

Return to Task List

  1. Log in as init.

  2. Type change system-parameters customer-options and press Enter to verify that the customer options are properly set.

  3. Go to screen 6, QSIG Optional Features, and set the Basic Call Setup field to y if the customer was using Supplementary Services Protocol b or d on an ISDN-PRI trunk group before the upgrade.

  4. Type change system-parameters offer-options and press Enter.

  5. If the Activate Offer field is n, set it to y and press Tab. A warning message lets you know whether you need to save translations and reboot to make the change permanent.

  6. Press Enter to effect the changes or Cancel if there were no changes.

  7. Contact the requester when done.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.