DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



Downloading Firmware to Port Circuit Packs

Using an FTP program through MS-DOS or UNIX

Return to Task List

  1. Type ping source_ip_address and press Enter to verify a communication link to the source board.

  2. Type ftp source_ip_address and press Enter.

  3. Log in using the user ID and password that you created at the time you created the file system.

  4. Type bin and press Enter, which enables older ftp programs to send binary files.

  5. Type put filename to copy the file to the source board.

  6. Type dir to verify that the file is on the source board.

  7. Repeat steps 5 and 6 for each file.

  8. Type quit and press Enter to end the ftp session.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.