Use the following procedure to send a voice message
to a user on a remote system that is administered on the local INTUITY system.
For acceptance tests, you must administer two test subscribers for each
remote machine. For example, if you plan to network with four remote machines
named CB1, CB2, CB3, and CB4, you need to administer two test subscribers
on each machine. During acceptance testing, you address voice messages to
each of those test subscribers. See Remote User Administration
for information on administering remote users on the INTUITY system.
To send a test message to a remote user:
- Dial the INTUITY AUDIX
voice messaging extension.
- When prompted to enter
an extension, use the telephone keypad to enter a local test subscriber
extension followed by #.
- Enter the password
for the local test subscriber followed by #.
You hear the Avaya INTUITY
Activity menu.
- Press 1 to record a
message.
At the tone, say the following:
"This is a test message from
<your name>. Please call me to verify that you have received this
message. My number is <your number>."
- Press # when you stop
recording and approve the message.
After you approve the message,
you hear the following prompt:
"Enter extension and
pound sign. When finished addressing, press pound."
- Enter the address for
a remote test subscriber followed by #. The address includes the prefix,
if any, and the extension of the remote test subscriber.
After you press #, the remote
machine repeats the remote test subscriber extension you entered.
- Repeat Step 6 for each
remote test subscriber on each remote machine.
- When you complete entering
remote test subscriber addresses, press #.
You hear the following prompt:
"To send message, press
pound, or enter a delivery option. To hear a list of options, press 0."
- Press # to send the
message.
The system schedules the delivery and returns you to the activity menu.
- Hang up the telephone.
- Continue with
Receiving Voice Messages from Remote Test
Subscribers.
