Administering for the Switch

To complete the migration, you must remove the Digital Communications Protocol (DCP) connection on the AUDIX Voice Power and create the Avaya Intuity hunt group. Follow these steps:
 

Task	Reference
If you are migrating from AUDIX Voice Power R2.1.1 or R3, remove the DCP Connection to the AUDIX Voice Power system.	AUDIX Voice Power R2.1.1 Switch Notes for System 75 or AUDIX Voice Power R3 Switch Integration to System�75
Remove the DCP station and extension that connects to the AUDIX Voice Power system.	AUDIX Voice Power R2.1.1 Switch Notes for System 75 or AUDIX Voice Power R3 Switch Integration to System�75
Create an Avaya Intuity hunt group. Use the old DCP extension, if any. Note: Use the same extension for the Avaya Intuity hunt group as was used for the Digital Communications Protocol (DCP) extension for the AUDIX Voice Power system. subscribers can then use the same telephone number to dial in to the Avaya Intuity system as was used with the AUDIX Voice Power system. This also avoids subscriber coverage path readministration.	Integrating Your Intuity System with a Switch For other manufacturer's switches, see the appropriate integration book
Assign Avaya Intuity voice ports to hunt group. This completes the connection of the switch to the Avaya Intuity system.	Integrating Your Intuity System with a Switch For other manufacturer's switches, see the appropriate integration book
Turn on the Avaya Intuity machine and log on. This puts the Intuity AUDIX system into service for the test stations.	Start the Voice System

http://www.avaya.com Avaya UCS Information Development