Administering the Avaya Intuity System for Integration with the System 25 Switch

Complete these procedures to integrate the Avaya Intuity system with the System 25 switch:

• Updating the Dial Plan Translation Window
• Setting MWI Device Assignments
• Setting MWI Parameters (Optional)
• Setting Address Ranges

Updating the Dial Plan Translation Window

You must update the Dial Plan Translation window to integrate the system with the System 25 switch.

To update the Dial Plan Translation window:

1. Start at the Avaya Intuity Main Menu and select:

Switch Interface Administration
	Call Data Interface Administration
		System Translation Administration
			Dial Plan Translation

The system displays the Dial Plan Translation Window for System 25.

2. Confirm that the number entered in the INTUITY Extension Length: field matches the dial plan number on the switch.
    
   

   Note: The extension length number must match the dial plan number on the switch and must be a number between 3 and 10.

3. If the extension length number does not match the dial plan number on the switch, enter the correct number in the INTUITY Extension Length: field.
4. Press F3 (Save).
5. Press F6 (Cancel) until you return to the Avaya Intuity Main Menu.
6. Continue with Setting MWI Device Assignments.

Setting MWI Device Assignments

 

Note: To assign a channel group for MWI updates, you must have already administered the group using the Channel to Group window under the Voice Equipment menu selection.

This procedure allows you to partition the channel or channels.

To assign the channel group number or numbers on which the system performs MWI updates:

1. Start at the Avaya Intuity Main Menu and select:

Switch Interface Administration
	Call Data Interface Administration
		MWI Administration
			Device Assignment

The system displays the first of two screens of the Device Assignment Window for System 25.

2. Confirm the switch number in the Switch Number field.
    
   

   Note: The switch number must match the number that identifies the switch in AUDIX administration. The switch number ranges from 1 to 64.

3. Enter a channel group number in the Device ID field.
    
   

   Note: The channel group number switch number must match the group number as administered on the Channels to Group window under the Voice Equipment menu of the Avaya Intuity system. The channel group number ranges from 1 to 32.

4. Press F3 (Save).
5. Press F6 (Cancel) four times to return to the Avaya Intuity Main Menu.
6. Continue with Setting MWI Parameters (Optional), if necessary.

If you do not need to set MWI parameters, you have completed the system administration required for a System 25 switch integration.

Setting MWI Parameters (Optional)

 

Note: In background updates, the system periodically refreshes the status of the MWI indicators. The staggering of updates prevents system resources from overloading. Enabling background updates is useful when updates are pending because the switch or Avaya Intuity system has been down.

You must set MWI parameters if you need to:

• Change the default prefix strings or suffix strings so MWI updates can occur
• Set the frequency with which the system performs background updates
• Alter the frequency of broadcast message updates
• Disable MWI updates altogether on the system or block them during a specified time


 


Note: See the switch administrator for more information on MWI parameter settings.

To set parameters that determine how the system performs MWI updates:

1. Start at the Avaya Intuity Main Menu and select:

Switch Interface Administration
	Call Data Interface Administration
		MWI Administration
			MWI Parameters

The system displays the MWI Parameters Window for System 25.

2. If you need to change the MWI prefix or suffix for the integration:
1. Change the values in the MWI On Prefix: field, MWI On Suffix: field, MWI Off Prefix: field, and MWI Off Suffix: field, as appropriate.
2. Continue with Step 3.

If you do not need to change the MWI prefix or suffix, continue with Step 3.

3. If you need to block MWI updates (including background and broadcast refresh) from occurring for a specified period of time:
1. Enter the time for blocking to start in the Block Start Time: field.
2. Enter the time for blocking to end in the Block End Time: field.
3. Continue with Step 4.

If you do not need to block MWI updates, continue with Step 4.

4. Press F3 (Save).
5. Press F6 (Cancel) four times to return to the Avaya Intuity Main Menu.
6. If you need to set address ranges, continue with Setting Address Ranges.

If you do not need to set address ranges, you have completed the system administration required for a System 25 switch integration.

Setting Address Ranges

To set address ranges on the Avaya Intuity system:

1. Start at the Avaya Intuity Main Menu and select:

AUDIX Administration

The system displays the AUDIX Command Prompt Screen.

2. Enter change machine at the enter command: prompt.

The system displays the Machine Profile Screen, Page 1.

3. Enter the first extension of the range in the Start Ext. field. The range must have the same number of digits as the number in the Extension Length: field.
4. Enter the ending extension of the range in the End Ext. field. The range must have the same number of digits as the number in the Extension Length: field.
5. Press F3 (Enter).
6. Enter exit to return to the Avaya Intuity Main Menu.

You have completed the system administration required for a System 25 switch integration.

http://www.avaya.com Avaya UCS Information Development