The View Administration Option

If you are using static addressing and encounter problems, use this procedure to verify the current values of system parameters and file versions.

NOTE: Also use the ADDR option to view IP Addresses covered in “Static Addressing Installation” in Chapter 3 of 4600 Series IP Telephone Installation Guide. IP Addresses might have been entered incorrectly. Verify whether you were provided with correct IP Addresses.

If PROCPSWD is administered as indicated in Chapter 4: Server Administration, you must type the Local Procedure password after pressing Mute, and before pressing V I E W.

The 4601 IP Telephone does not support static addressing, and therefore does not support the V I E W command.

1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of the telephone:

Mute 8 4 3 9 # (Mute V I E W #)

NOTE: Press the Mute button momentarily. Do not press this key while pressing other keys. The 4630 IP Telephone does not have a dedicated Hold button. For all other 4600 Series IP Telephones, pressing the Hold button instead of the Mute button also works.

The following text displays left-justified at the top of the display:

2. Press the * button at any time during viewing to display the next name and system value pair from Table 12. The first pair displays again after the last pair displays.

Press the # button at any time during viewing to terminate the procedure and restore the user interface to its previous state.

The names and values display in the order shown in Table 12.