|
|
|
|
|
The sysmon command executes a program that monitors incoming telephone lines and the associated cards to see that they are functional.
Synopsis
sysmon [refresh_rate]
Description
The sysmon command verifies that each incoming telephone line and its associated card are functional. Before initializing the test, locate a touch-tone telephone close to the system controller and get a telephone number to be used for dialing into the system. Use the assign channel command to assign to a group any channels you want to test. Use the assign service/startup command to assign a script to the same group.
Once the channels and service are assigned, enter the sysmon command. The resulting display shows all channels and their current states. The system refreshes the displayed information every 5 seconds by default.
The optional argument refresh_rate is a number that specifies the frequency in seconds to refresh the displayed information.
Example
The following example shows the current state of the system channels and refreshes the displayed information every 4 seconds.
sysmon 4
See also
