Administering the Avaya IR system and the switch for CTI

Administer the Avaya IR system and the DEFINITY PBX as follows:

1. Administer the MAPD in DLG mode. See CallVisor PC LAN over MAPD Installation, Administration, and Maintenance, 555-230-113.
2. Administer the Avaya IR network interface card.
3. Administer the E1 or T1 telephone lines on the PBX.
4. Assign telephone numbers (or extensions) to the ports of the Avaya IR that will use CTI.
5. Administer the DEFINITY for ASAI connectivity with the CVCT server.
6. Administer the E1 and T1 lines on the Avaya IR system.

   Make telephony connections to the switch as you would for ASAI. Make digital connections between the Avaya IR system and the line side of the switch with either line side FXS T1 or line side FXS E1.

7. Administer the CTI DIP to the CVCT server on the Avaya IR system.

© 2006 Avaya Inc. All Rights Reserved.