|
|
|
|
|
The asaiparms command is used to administer ASAI parameters.
Synopsis
asaichan [-cl] [-e alerting | connected]
[-i <ip address> | <host name>]
[-n signal01 | signal02 | signal03 | signal04 | signal05 | signal06 | signal07 | signal08]
[-t low | normal | high]
Description
Parameters for the asaichan command are described in the following table.
Parameter |
Description |
-c |
Change parameters. |
-l |
List parameters. |
-e |
When the connect event is reported. Values: alerting, connected. |
-i <ip address> | <host name> |
The IP address or host name of the MAPD. |
-n signal01 through signal08 |
The Node ID of the Avaya IR system as administered on the MAPD. Values: signal01, signal02, signal03, signal04, signal05, signal06, signal07, signal08. |
-t low | normal | high |
The trace detail. Values: low, normal, high. |
See also
